I just installed these badboys today, took around 5 hours to do both all up.. due to lack of tools and stupidity.
Lesson learnt, dont try to burn the bushings out because:
1. They dont burn, should be used on shoes or something! ( remembered watching bear grylls and his shoes melted/ burnt on the volcanoe)
and also:
2. Use OIL as LUBE as it never dries out,,, unlike laundry detergent ( got the laundry detergent idea from a DIY found online,,,, but oil worked better)
Anyways abit of a write up:
Work station-
Then I used a screwdriver ( lol) and a hammer to wedge it inbetween the lollypop and the metal carrier... then I used a chisel to cut through.. chisel was amazing wouldnt of done this without it!
Well then came the inner metal bit which was stuck onto the control arm...
Used a grinder to cut through:
Then it was left with this:
Then I alligned the arrows of the lollypop with the CAB
Lubed it up and smacked it with a mallet...
Then I had to mount it onto the control arm...
Ok a word of advice here...
Lube up the control arm and the CAB with OIL... then twist the CAB to get it onto the control arm and then use a mallet to tap it into place...
Do not hold the CAB and hit it with a mallet.. it will not work...
Final thoughts - Car feels more stable, feels great on corners aswell